14
PT-S959SDLX / PT-S959SDLXC Series User’s Manual
Hardware setup
・
Before you start, be sure that the power is turned off.
・
Remove only those screws that are explained. Do not move any other screw.
◆
Attaching the CFast Attachment Fittings
(1) After inserting the CFast Card, fasten the bundled CFast attachment fittings with a screw.
Figure 3.1. Attaching the CFast Attachment Fittings
-
Insert the CFast Card face up.
-
Screw holes may be damaged if screws are tightened with a torque greater than the specified
torque.
The specified tightening torque is 3 – 3.5 kgf
･
cm.
-
If you use a CFast card other than the optional card, we cannot guarantee the specifications of
this product. To use the product within its specifications, be sure to use the optional CFast card.
-
To prevent potential damage caused by static electricity, take appropriate anti-static measures
(for example, wearing an anti-static wristband) when inserting or removing the CFast card.
-
At the system works, if touch to CFAST card or the cable in the vicinity of the CFast card, to
prevent potential damage caused by static electricity, take appropriate anti-static measures (for
example, wearing an anti-static wristband).
-
Do not touch the electronic board components when inserting or removing the CFast card.
-
Do not touch the terminals on the CFast card. Doing so may damage the card.
-
Be careful not to mistake the orientation of the CFast card when inserting it. Also, do not use
excessive force when inserting the CFast card. Doing so may damage the connector.
-
Do not drop or otherwise subject the CFast card to strong impacts before insertion. Doing so
may damage the card.
