Contec PI-32B(PCI)H, User Manual

Page: 59 / 65

6. About Hardware
52 PIO-16/16B(PCI)H, PI-32B(PCI)H, PO-32B(PCI)H
PO-32B(PCI)H
Table 6.3. Specifications < PO-32B(PCI)H>
Item Specifications
Output section
Output format Opto-isolated input (Compatible with current sink output)(Negative logic *1)
Number of output signal
channels
32 channels(One common power supply per 16 channels)
Output rating
Output voltage 35VDC (Max.)
Output current 100mA (par channel) (Max. )
Residual voltage with output on 0.5V or less (Output current ≤ 50mA), 1.0V or less (Output current ≤ 100mA)
Surge protector Zener diode RD47FM(NEC) or equivalent
Response time 200 µ sec within
Common section
I/O address Any 32-byte boundary
Interruption level Not used
Max. board count for
connection
16 boards including the master board
Dielectric strength 500Vrms
External circuit power supply 12 - 24VDC(±10%)
Internal power 12VDC 240mA *2
Power consumption
5VDC 1200mA (Max.) (Using the internal power)
5VDC 300mA (Max.) (Using the External power)
Operating condition 0 - 50
°
C, 10 - 90%RH (No condensation)
Allowable distance of signal
extension
Approx. 50m (depending on wiring environment)
Bus specification PCI (32bit, 33MHz, Universal key shapes supported *3)
Dimension (mm) 176.41(L) x 105.68(H)
Weight 150g
Standard VCCI Class A, CE Marking (EMC Directive Class A, RoHS Directive)
*1 Data “0” and “1” correspond to the High and Low levels, respectively.
*2 When the internal power supply is used, the switch section of output channel consumes a maximum of 40 mA and
thus the output current to be supplied from the board is 200 mA.
*3 This board re5V power supply from expansion slots (it does not operate in the environment of only +3.3V
power supply).
Board Dimensions
[mm]
The standard outside dimension (L) is
the distance from the end of the board
to the outer surface of the slot cover.
176.41(L)
10
5.
68
(H
)