1. Introduction
IPC-PT/MV10 / IPC-PT/LS10 / HPC-HMV10 / HPC-HLS10 Hardware Manual
3
Handling Precautions
Take the following precautions when handling this product.
-
Do not use or store the product in a location such as extremely high or low temperature, rapid
temperature changes, and the place which receives a strong ultraviolet ray.
Example:
- Exposure to direct sun
- In the vicinity of a heat source
-
Do not use the product in extremely humid or dusty locations.
It is extremely dangerous to use the product with its interior penetrated by water or any other fluid
or conductive dust. If the product must be used in such an environment, install it on a dust-proof
control panel, for example.
-
Avoid using or storing the device in locations subject to shock or vibration.
-
Do not use the product in the vicinity of devices that generate strong magnetic force or noise.
Such devices will cause this device to malfunction.
-
Do not use or store the product in the presence of chemicals.
-
To clean the PANECON-PC, wipe it gently with a soft cloth dampened with either water or mild
detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent
pealing or discoloration of the paint.
-
Do not use any sharp-pointed object such as a mechanical pencil to touch the touch panel. Doing
so may scratch the touch panel, resulting in malfunctions.
-
Do not subject the touch panel to shock as doing so may break it.
-
When the surface or frame of the touch panel has become dirty, wipe it with neutral detergent. Do
not wipe the touch panel with thinner, alcohol, ammonia, or a strong chlorinated solvent. Use a
protective sheet (available as an option) if the touch panel is used where it can easily collect dust
and dirt.
-
Burn-in on TFT Display
"Burn-in" may occur if the same display is retained for a long time. Avoid this by periodically
switching the display so that the same display is not maintained for a long time.
* Burn-In: Phenomenon characterized by a TFT display as a result of long-time display of the
same screen where a shadow-like trace persists because electric charge remains in the
LCD element even after the patterns are changed.
-
It is a characteristic of analog touch panels that their resistance may vary with changes to the
ambient environment (temperature and humidity) and with their own aging, resulting in the
deviation of the detection point. If this is the case, calibrate the touch panel again to re-set
calibration data.
-
Life expectancy of components
(1)Battery:
A lithium-ion primary battery is used to back up the internal
clock/calendar and CMOS RAM. The non-energized backup time at
25°C is 10 years or more.
