—
Software
—
GPIB-FL2-USB Reference Manual
—
47
—
6.
CONTEC Device Utility
CONTEC Device Utility is utility software to setup the CONTEC's measuring control device. Use this
software to update firmware of the product.
1.
Updating Firmware
Firmware is namely software which is embedded in the product. Up-to-date firmware (update file)
will be supplied in the CONTEC website when function upgrades and so on.
The following presents how to update firmware.
1
Preparation for updating
Unplug and remove all of USB cables and interface connectors from the product once.
When using more than one converter, always connect each of them with a USB cable, and
complete updating before starting to update the next product.
Set Module ID of this product to FFh.
This setting is specifically used for firmware updating.
2
Connect the product to USB port.
Connect the converter to USB port of the PC.
