—
Setup
—
GPIB-FL2-USB Reference Manual
—
20
—
1.
What is Setup?
Setup means a series of steps to take before the product can be used.
Different steps are required for driver software and hardware.
The setup procedure varies with the OS or driver software used.
1.
Driver Software Installation
This section describes the procedure to start the application program development using the driver
software API-GPIB (WDM) for USB.
Taking the following steps sets up the driver software and hardware. You can use the diagnosis
program later on to check whether the driver software and hardware function properly.
Step 1 Driver Software Installation (page21)
Step 2 Hardware Setting (page22)
Step 3 Hardware Installation (page26)
Step 4 Driver Software Initialization (page28)
Step 5 Operation Check (page30)
If Setup fails to be performed properly, see the
“Setup Troubleshooting (page34)”
section at the
end of this chapter.
