Contec GCOM-2C2-PCI, User Manual

Page: 37 / 53

3. External Connection
32
GCOM-2C2-PCI, GCOM-4C2-PCI, GCOM-8C2-PCI
Connection conversion cable & connection conversion unit (Option)
Connection Conversion Unit for RS-232C(78P
→
25P x 8) CCU-78F/25M
COM-8ch Board Optional Cable for CCU-78F/25M (2m) RSS-78M
Connection cable (Option)
RS-232C Straight Cable with D-SUB25P (1.8m) RSS-25M/F
RS-232C Cross Cable with D-SUB25P (1.8m) RSC-25F
RS-232C Connection Conversion Straight Cable (25M
→
9F, 1.8m) RSS-25M/9F
RS-232C Connection Conversion Straight Cable (25F
→
9M, 1.8m) RSS-25F/9M
RS-232C Connection Conversion Cross Cable (25F
→
9F, 1.8m) RSC-25F/9F
Connecting directly to the port connector.
If connecting an external device directly from the connector on the board, use a CN5-D78M or
equivalent connector.
Pin Assignment
- Connector used
78-pin D-SUB, female connector
DV11603G4 (mfd. by FOXCONN)equivalent
- Applicable connector
CN5-D78M (mfd. by CONTEC, Male) (Five connector set)
59
39
78
20
60 1
40 21
Screw nut: UNC#4-40(inch screw)
Figure 3.13. Interface Connector < GCOM-8C2-PCI >