Contec EPC-2020 Series User Manual Download Page 91

Page: 91 / 96

6. Software RAID setup

EPC-2020 Series User’s manual

RAID setup when replacing the HDD

The EPC-2010 series is installed with a RAID-1 Array created. However, if a HDD is replaced, you must
reconfigure the mirroring RAID drive in the Array.

Set up the RAID in accordance with the following procedure.

CAUTION

RAIDs in the EPC-2010 series are not hot-swappable. Always turn off the power before replacing a

HDD.

1. Replace the HDD and boot the PC.

Intel(R) Rapid Storage Technology - Option ROM - 10.5.0.864

RAID Volumes:

ID Name Level Strip Size Status Bootable

0 Volume0 RAID1(Mirror) N/A **GB Degraded Yes

Physical Disks:

Port Drive Model Serial # Size Type/Status(Vol ID)

* *********** ************* ***GB Non-RAID Disk

Press <CTRL-I> to enter Configuration Utility..

2. Press the <Ctrl> and <I> keys in the above screen to start the RAID utility. When the RAID utility

launches, the following screen will appear with the replaced HDD indicated.

“Degraded” volume and disk available for rebuilding detected. Selecting

a disk initiates a rebuild. Rebuild completes in the operating system.

Select the port of the destination disk for rebuilding (ESC to exit):

Port Drive Model Serial # Size

* ***** ********** ********** ***GB

[ DEGRADED VOLUME DETECTED ]

[

↑↓

]-Previous/Next [ENTER]-SelectDisk [ESC]-Exit

Summary of Contents for EPC-2020 Series

































































































Search results

Summary of Contents for EPC-2020 Series

Reviews:

Brands by name

Popular brands

Contec EPC-2020 Series, User Manual

Search results

Summary of Contents for EPC-2020 Series

Reviews:

Brands by name

Popular brands