38
EmCORE-i612VLS/C400 User's Manual
CPU Internal Cache/External Cache
These two categories speed up memory access. However, it depends on
CPU/chipset design. Enabled : Enable cache, Disabled : Disable cache
CPU L2 Cache ECC Checking
This item allows you to enable/disable CPU L2 Cache ECC checking.
The choice: Enabled, Disabled.
Processor Number Feature
This feature appears when a a Pentium III processor is installed. It enables
you enables you to control whether the Pentium III's serial number can be
read by external programs. The choice : Enabled. Disabled
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power up the
computer. If it is set to Enable, BIOS will shorten or skip some check items
during POST. Enabled : Enable quick POST. Disabled : Normal POST
First/Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items. The choices are : Floppy, LS/ZIP, HDD,
SCSI, CDROM, Disabled.
Swap Floppy Drive
If the system has two floppy drives, you can swap the logical drive name
assignments. The choice: Enabled/Disabled.
Boot Up Floppy Seek
Seeks disk drives during boot up. Disabling speeds boot up.
The choice: Enabled/Disabled.
Boot Up NumLock Status
Select power on state for NumLock. The choice: Enabled/Disabled.
Gate A20 Option
Select if chipset or keyboard controller should control GateA20.
Normal A pin in the keyboard controller controls GateA20
Fast
Lets chipset control GateA20
Typematic Rate Setting
Key strokes repeat at a rate determined by the keyboard controller. When
enabled, the typematic rate and typematic delay can be selected.
The choice: Enabled/Disabled.
Security Option
Select whether the password is required every time the system boots or only
when you enter setup.
System The system will not boot and access to Setup will be denied if the
correct password is not entered at the prompt.
StockCheck.com
