Contec DIO-24DY-USB, User Manual

Page: 16 / 38

2. Setup
DIO-24DY-USB
11
Step 3 Installing the Hardware
Under Windows, information about the converter needs to be detected by the OS. This is called
hardware installation.
To use more than one of this product, make sure to install them one by one, setting each unit after
completing the previous one.
Connecting the Product
(1) Turn on the power to the PC before connecting the product.
(2) When the PC has been up and running, plug the USB interface connector to a USB port in the PC.
The converter can also be connected to the PC via a USB hub.
USB port
Figure 2.2. Connecting the PC
CAUTION
It may cause a trouble in recognizing and operating the device according to the kind of USB hub. If
you use the USB hub, we encourage you to take advantage of the CONTEC’s product loan service to
confirm operation before purchasing.
(3) USB cable can be attached firmly to the main unit by using a USB cable attachment.
Figure 2.3. Attaching a USB Attachment
CAUTION
The USB cable attachment cannot be used excluding an attached cable.