Contec DIO-24DY-USB, User Manual

Page: 14 / 38

2. Setup
DIO-24DY-USB
9
Step 2 Initializing the Software
Connect with the product, and install following software if USB driver has been installed.
The following description assumes the operating system as Windows XP. Although some user
interfaces are different depending on the OS used, the basic procedure is the same.
Points
-
If you are using Windows XP or Windows 2000, please log on as Administrator (authorized
account) before proceeding to the following steps.
The following shows the basic flow for installing product.
Illustration of Menu Screen
Points
-
Please set up the supplied CD-ROM if it has not been set up. The menu starts automatically.
- If the menu do not start, launch X:AUTORUN.EXE(X:CD-ROM drive) from [Run…] in Start
menu.
- The screen design may be different.
Install the Development Environment such
as sample programs and online help, etc.
Refer to the description
about CD-ROM.
Install the utility.
Install the C-LOGGER.
*Cannot be used for this product.
Refer to the user’s guide.
Page 9 Page 11
Page 13
Setting Properties Using
Device Manager
- Setting the Device Name.
Connecting the Product
- Connecting the PC
Initializing the Software
- Installation of
API-USBP(WDM)
Development Environment