Contec DIG-100M1002-PCI User Manual Download

Page: 11 / 73

1. Before Using the Product

DIG-100M1002-PCI

Support Software

You should use CONTEC support software according to your purpose and development environment.

Windows version of digitizer driver

API-DIG(WDM)

[Stored on the bundled CD-ROM driver library API-PAC(W32) cTEST]

The API-DIG(WDM) is the Windows version driver library software that provides products in the form of Win32 API

functions (DLL). Various sample programs such as Visual Basic and Visual C++, etc is provided.

Windows version of application software Front panel software

[Stored on the bundled CD-ROM driver library API-PAC(W32) cTEST]

The front panel software is an application which can be used as an oscilloscope or

waveform

judgment

instrument

it also has the function of diagnosing the state of the board and its driver.

Moreover, you may use the “Diagnosis Report” feature reports the driver settings, the presence or absence of the

board, I/O status, and interrupt status.

Windows version of application software Configuration software

[Stored on the bundled CD-ROM driver library API-PAC(W32) cTEST]

By configuration software, you may create a configuration file of acquisition conditions for this product

in a wizard form.

Windows version of application software Mask editor software

[Stored on the bundled CD-ROM driver library API-PAC(W32) cTEST]

By the mask editor software, you may create a configuration file for

waveform

judgment with creating the waveform

by drawing on screen directly with mouse or drawing with mathematics functions.

For more details on the supported OS, applicable language and new information, please visit the CONTEC’s Web site.

Cable & Connector (Option)

< For analog I/O >

BNC Cable

: BNC-B100 (1m)

: BNC-B200 (2m)

: BNC-B300 (3m)

Check the CONTEC’s Web site for more information on these options.

Summary of Contents for DIG-100M1002-PCI










































































Search results

Summary of Contents for DIG-100M1002-PCI

Reviews:

Related manuals for DIG-100M1002-PCI

Brands by name

Popular brands

Contec DIG-100M1002-PCI, User Manual

Search results

Summary of Contents for DIG-100M1002-PCI

Reviews:

Related manuals for DIG-100M1002-PCI

Brands by name

Popular brands