—
Appendix
—
CPSN-DI-16BCL Reference Manual (Hardware)
—
40
—
1.
Specifications
Function Specifications
Item
Description
Input
Input type
Opto-coupler isolated input (supports current sink [negative logic] output
*1/current source [positive logic] output *2)
Isolation
Opto-coupler Isolation
Voltage Resistance
500VACrms
Input Resistance
8.2k
Ω
Input ON current
1.0mA or more
Input OFF current
0.16mA or less
Interrupt
16 interrupt input signals are arranged into a single output of interrupt signal.
An interrupt is generated at the falling edge (HIGH-to-LOW transition)
and the rising edge (LOW-to-HIGH transition) or at both of the edges. (setting
can be done by software)
Software filter (LPF)
1msec – 1000msec *3
Response time
Within 200
μ
sec
Number of input signal
channels
16 (shared common)
LED
DI00 – DI07 (Green), DI10 – DI17 (Green)
Common
Connector
MIL connector 20-pin (2.54mm pitch 10 x 2 lines)
Applicable wire
Flat cable with MIL connector
External circuit power
supply
12 - 24VDC (±10%)
Internal circuit power
supply
12VDC
62 mA can be output from the total of all inputs as an external output current
Electricity consumption 5V 0.15A (Max.)
3.3V 0.10A (Max.)
Allowable distance of
signal extension
Approx. 50m (depending on wiring environment)
Physical dimensions
(mm)
15.6 (W) x 52.6(D) x 84(H) (not include projection)
Weight
50g
*1 Data “0” and “1” correspond to the High and Low levels, respectively.
*2 Data “0” and “1” correspond to the Low and High levels, respectively.
*3 To meet the specified CE EMC Directive, set the digital filter one meter or longer.
