—
Appendix
—
CPS-MC341-DS1-111 Reference Manual (Hardware)
—
58
—
Item
CPS-MC341-DS1-111
(HIGH-to-LOW transition) or rising edge (LOW-to-HIGH
transition). (setting can be done by software)
The number of channels
8
LED
DI0 – DI7 (Yellow)
Connector
2-piece 3.5mm pitch 10-pin terminal
(MCOM, DI0, DI1, DI2, DI3, DI4, DI5, DI6, DI7, N.C.)
Applicable wire
AWG28 - 16
Digital output
Output type
Open corrector output (Current sink type) (negative logic) *1
Isolation/voltage resistance Opto-coupler isolation/1000V
Maximum output voltage
resistance/current
24V/100mA
Residual voltage with
output ON
0.5V or less (Output current<=50mA), 1.0V or less (Output
current<=100mA
The number of channels
8
LED
DO0 – DO7 (Yellow)
Connector
2 pieces 3.5mm pitch 3-pin terminal
(MCOM, DO0, DO1, DO2, DO3 DO4, DO5, DO6, DO7, N.C.)
Applicable wire
AWG28 - 16
LED
Power (Green)/Status 1 (Green)/Status 2 (Red)
Switch
Reset SW, Shut Down SW, Full Duplex/Half Duplex Switching
SW
RTC
RTC built-in (battery not equipped)
Power supply *2 Rated input voltage
12 - 24VDC
Input voltage range
10.8 - 30VDC
Power consumption
12V 0.7A (Max.), 24V 0.4A (Max.)
Connector
2-piece 3.5mm pitch 3-pin terminal (V+, V-, FG)
Applicable wire
AWG24 - 16
Surge protection element
V+ - V-, V- - FG
Interactive TVS diode
Stand off voltage : ±30V, Peak pulse power : 400W (1msec)
Physical dimensions (mm)
188.0(W)×78.0(D)×30.5(H) (No projection included)
Weight
250g
Installation method
Quick mounting on the 35mm DIN rail, Mounting on the
wall using the screws *3
OS
Linux kernel 3.2
*1 Data 0 corresponds to High level and Data 1 corresponds to Low level.
*2 Use power cable within 3meters.
*3 Commercial screws are required (fit into
φ3.5
hole).
