Contec CONPROSYS CPS-CNT-3202I, Reference Manual

Page: 8 / 58

—
Introduction
—
CPS-CNT-3202I Reference Manual (Hardware)
— 8 —
4. Features
1. Hardware features

Count two-phase signals
This product can count two-phase and single-phase signals including encoders, and linear scales. It is equipped with two channels of 32-
bit up/down counters.

Opto-coupler isolated input
Opto-coupler isolated input of 500 kHz response frequency within.

Interrupt, Output signal
Generate an interrupt or output one-pulse signal when the count data of each channel match a specified value.

Digital filter to prevent input signals from carrying
noise or a chattering
This product has a digital filter to prevent input signals from carrying noise or a chattering.
All input terminals can be added a digital filter, and the setting can be performed by software.

Output circuits include zener diodes for surge voltage
protection
Zener diodes are connected to the output circuits to protect against surge voltages. The rated output is 35VDC, 50 mA to the maximum
per channel.

Compact design
Compact design, 25.2 (W)×94.7(D)×124.8 (H), features flexibility in installation.

Adaptable to a temperature range between -20 and
+60°C
The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in the various environments.

Installation easy with two pieces of terminal support
and DIN rail
You can install and remove a terminal connector without a screwdriver so that it can shorten the time of the replacement. As the product
can be not only mounted on DIN rail, but also is removable along the side rails, replacing is simple and easy as well.