The sterilization the manufacturer recommended to cleaning the monitor and accessories are
ethanol and Acetaldehyde.
CAUTION: To avoid damaging the monitor:
1
Follow the manufacturer’s instruction to dilute the solution, or adopt the lowest possible
density.
2
Do not let liquid enter the monitor.
3
No part of this monitor can be subjected to immersion in liquid.
4
Do not pour liquid onto the monitor during sterilization.
5
Wipe the device with a clean moistened cloth to remove any remaining sterilant.
6.7 Disinfection
To avoid extended damage to the equipment, disinfect ion is only recommended when stipulated
as necessary in the hospital maintenance schedule. Disinfections facilities should be cleaned first.
CAUTION:
①
Follow the manufacturer’s instruction to dilute the solution.
②
Do not use bleaching powder containing chloros on any parts of the monitor.
③
Do not disinfect the monitor and it’s accessories with autoclave④gassing④formaldehyde process
or radiation.
④
Check carefully after cleaning, sterilization, or disinfect ion of monitor and accessories. If
aging and damage are found, please do not use them to monitor.
Note
: The manufacturer has no responsibility for the effectiveness of controlling infectious
disease using these chemical agents. Please contact infectious disease experts in your
hospital for details.
7 Warranties
The manufacturer warrants that the Fetal Monitor we sell is free from defects in material and
workmanship. In the status of normal operation and maintenance, if the manufacturer receives
notice of such defects during the warranty period that begins on the date of shipment, the
manufacturer shall, at its options, either repair or replace hardware products that prove to be
defective. The unit is guaranteed for periods of 12 months, valid from the date of purchase. The
manufacturer also provides long-term repair service for our clients.
The manufacturer’s obligations or liability under this warranty does not include any transportation
or other charges or liability for direct, indirect or consequential damages or delay resulting from
the following conditions.
The following conditions are not included in the warranty:
1
Assembly operation, extensions, re-adjustments are carried out by the importer.
2
Application of the products or repaired by anyone other than the manufacturer authorized
representative.
3
This warranty shall not extend to any instrument that has been damaged subjected to misuse,
