Contec AI-1604CI2-PCI, User Manual

Page: 32 / 90

2. Setup
AI-1604CI2-PCI
25
(3) The property page for the device opens.
Enter the device name in the common settings tab page and then click [OK].
The device name you set here is used later when programming.
* The initial device name that appears is a default value. You can use this default name if you wish.
* Make sure that you do not use the same name for more than one device.
CAUTION
Note that the displayed board name is "ADI16-4C(PCI)" even though you have installed this board.
There is no problem in operation even if the board name is displayed as “ADI16-4C(PCI)".
You have now finished installing the initial setting of Software.
* The name of the board
you have just added is
displayed.
- ADI16-4C(PCI)