Contec ADI12-16(PCI), User Manual, Page: 10 / 95

1. Before Using the Product
ADI12-16(PCI)
3
Cable & Connector (Option)
Flat Cable with One 37-pin D-SUB Connector : PCA37P-1.5 (1.5m)
Shielded Cable with One 37-pin D-SUB Connector : PCA37PS-0.5P (0.5m)
: PCA37PS-1.5P (1.5m)
Flat Cable with Two 37-pin D-SUB Connectors : PCB37PS-1.5(1.5m)
Shielded Cable with Two 37-pin D-SUB Connectors : PCB37PS-0.5P (0.5m)
: PCB37PS-1.5P (1.5m)
Flat Cable with One 15-pin D-SUB Connector : PCA15P-1.5 (1.5m)
Flat Cable with Two 15-pin D-SUB Connectors : PCB15P-1.5 (1.5m)*1
Coaxial Cable for Single-ended Inputs (16 channels) : PCC16PS-1.5 (1.5m)
: PCC16PS-3 (3m)
2 Wires Shielded Cable for Differential Inputs (8 channels) : PCD8PS-1.5 (1.5m)
: PCD8PS-3 (3m)
Flat Cable with 1 Sided 16-Pin Header Connector (1.5m) : DT/E1
Conversion Cable (16Pin to 15Pin) with Bracket : DT-E3
37-pin Male Connector Set (5 Pieces) : CN5-D37M
*1 For FTP-15 only
Accessories (Option)
Termination panel with Screw Terminals for Spade Lugs(M3 screw, 37points)
: DTP-3A *2
Termination panel with Screw Terminals(M2.6 screw, 37points) : DTP-4A *2
Screw Terminal(M3 screw, 37points) : EPD-37A *2*3
Screw Terminal(M3.5 screw, 37points) : EPD-37 *2
Termination panel for Digital I/O on Analog Multi-function Boards : FTP-15 *4
Termination panel with BNC connectors for Analog Multi-function Boards(Analog Input 16ch)
: ATP-16 *2
8ch-Isolation Accessory Board for Analog Inputs : ATII-8C *2*5
Low pass filter expansion board : ATLF-8A *2*5
Buffer amplifier termination panel for analog multi-function box(16ch type) : ATBA-16E*2
*2 A PCB37P or PCB37PS optional cable is required separately.
*3 “Spring-up” type terminal is used to prevent terminal screws from falling off.
*4 A DT-E3 and PCB15P-1.5 optional cable is required separately.
*5 External Power supply is required separately.
* Check the CONTEC’s Web site for more information on these options.