4
ADA16-8/2(LPCI)L, AD16-16(LPCI)L, DA16-4(LPCI)L
Ver.1.00
Using the On-board Connectors
To connect an external device to this board, plug the cable from the device into the interface connector (CN1) shown below.
Examples of Connecting Options
ADA16-8/2(LPCI)L,
AD16-16(LPCI)L,
DA16-4(LPCI)L
*1 : PCB50PS-0.5P(Recommended)
Relay terminal stand
For BNC connector
ATP-8L *2
Terminal unit
EPD-50A
Option Cable
PCB50PS- *1
*2 : The ADA16-8/2(LPCI)L can use all of the analog inputs/outputs.
The AD16-16(LPCI)L can use up to eight analog inputs.
The DA16-4(LPCI)L can use up to two analog outputs.
- Connector used
50-pin mini-ribbon connector
10250-52A2JL[mfd.by 3M]
- Applilcable connector
10150-6000EL[mfd. by 3M]
CN1
Interface connector (CN1)
N.C.
AGND
N.C.
AGND
AI 04
N.C.
AI 05
N.C.
AGND
AGND
AI 06
N.C.
AI 07
N.C.
AO START
AO STOP
AO EXCLK
DGND
DO 00
DO 01
DO 02
DO 03
DGND
CNT UPCLK
Reseved
AO 00
AGND
AO 01
AGND
AI 00
N.C.
AI 01
N.C.
AGND
AGND
AI 02
N.C.
AI 03
N.C.
AI START
AI STOP
AI EXCLK
DGND
DI 00
DI 01
DI 02
DI 03
DGND
CNT GATE
CNT OUT
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
Analog Output 00
Analog Ground ( for AO )
Analog Output 01
Analog Ground ( for AO )
Analog Input 00
Non Connect
Analog Input 01
Non Connect
Analog Ground ( for AI )
Analog Ground ( for AI )
Analog Input 02
Non Connect
Analog Input 03
Non Connect
AI External Start Trigger Input
AI External Stop Trigger Input
AI External Sampling Clock Input
Digital Ground
Digital Input 00
Digital Input 01
Digital Input 02
Digital Input 03
Digital Ground
Counter Gate Control Input
Counter Output
Non Connect
Analog Ground ( for AO )
Non Connect
Analog Ground ( for AO )
Analog Input 04
Non Connect
Analog Input 05
Non Connect
Analog Ground ( for AI )
Analog Ground ( for AI )
Analog Input 06
Non Connect
Analog Input 07
Non Connect
AO External Start Trigger Input
AO External Stop Trigger Input
AO External Sampling Clock Inpu
Digital Ground
Digital Output 00
Digital Output 01
Digital Output 02
Digital Output 03
Digital Ground
Counter UP Clock Input
Reserved
Analog Input00 - Analog Input07
Analog input signal. The numbers correspond to channel numbers.
Analog Output00 - Analog Output01
Analog output signal. The numbers correspond to channel numbers.
Analog Ground
Common analog ground for analog I/O signals.
AI External Start Trigger Input
External trigger input for starting analog input sampling.
AI External Stop Trigger Input
External trigger input for stopping analog input sampling.
AI External Sampling Clock Input
External sampling clock input for analog input.
AO External Start Trigger Input
External trigger input for starting analog output sampling.
AO External Stop Trigger Input
External trigger input for stopping analog output sampling.
AO External Sampling Clock Input
External sampling clock input for analog output.
Digital Input00 - Digital Input03
Digital input signal.
Digital Output00 - Digital Output03
Digital output signal.
Counter Gate Control Input
Gate control input signal for counter.
Counter Up Clock Input
Count-up clock input signal for counter.
Counter Output
Counter output signal.
Digital Ground
Common digital ground for digital I/O signals, external trigger inputs,
external sampling clock inputs, and counter I/O signals.
Reserved Reserved
pin.
N.C.
No connection to this pin.
- Do not connect any of the outputs and power outputs to the analog or digital ground. Neither connect outputs to each other. Doing either can
result in a fault.
- If analog and digital ground are shorted together, noise on the digital signals may affect the analog signals. Accordingly, analog and digital ground
should be separated.
- Leave "Reserved" pins unconnected. Connecting these pins may cause a fault in the board.