3
ADA16-8/2(LPCI)L, AD16-16(LPCI)L, DA16-4(LPCI)L
Ver.1.00
Item Specification
Analog output
Isolated specification
Un-Isolated
Number of output
channels
4ch
Output range
Bipolar
±
10V
Absolute max. output
currency
±
3mA
Output impedance
1
Ω
or less
Resolution 16bit
Non-Linearity error *1
±
5LSB
Conversion speed
10μ
sec
Buffer memory
1k Word
Conversion start trigger
Software / external trigger
Conversion stop trigger
Number of sampling times / external trigger/software
External start signal
TTL level (Rising or falling edge can be selected by software)
Digital filter (1
μ
sec can be selected by software)
External stop signal
TTL level (Rising or falling edge can be selected by software)
Digital filter (1
μ
sec can be selected by software)
External clock signal
TTL level (Rising or falling edge can be selected by software)
Digital I/O
Number of input
channels
4 TTL levels (positive logic)
Number of output
channels
4 TTL levels (positive logic)
Counter
Number of channels
1ch
Counting system
Up count
Max. count
FFFFFFFFh (Binary data,32bit)
Number of external
inputs
2 TTL levels (Gate/Up)/ch
Gate (High level), Up (Rising edge)
Number of external
outputs
TTL
Count match output (positive logic, pulse output)
Response frequency
10MHz (Max.)
Common section
I/O address
64 ports
Interruption level
Errors and various factors, One interrupt request line as
INTA
Connector
10250-52A2JL[3M]
Power consumption
5VDC 440mA (Max.)
Operating condition
0 - 50
°
C, 10 - 90%RH (No condensation)
PCI bus specification
32bit, 33MHz, Universal key shapes supported *2
Dimension (mm)
121.69 (L) x 63.41 (H)
Weight 60g
*1: The non-linearity error means an error of approximately 0.1% occurs
over the maximum range at 0
and 50
ambient temperature.
*2: This board requires power supply at +5V from an expansion slot
(it does not work on a machine with a +3.3V power supply alone).
The standard outside dimension(L) is
the distance from the end of the board
to the outer surface of the slot cover.
[mm]
121.69(L)
63.41(
H)
Support Software
You should use CONTEC support software according to your
purpose and development environment.
API-PAC(W32) is the library software that provides the commands
for CONTEC hardware products in the form of Windows standard
Win32 API functions (DLL). It makes it easy to create high-speed
application software taking advantage of the CONTEC hardware
using various programming languages that support Win32 API
functions, such as Visual Basic and Visual C/C++.
It can also be used by the installed diagnosis program to check
hardware operations.
CONTEC provides download services (at http://www.contec.com/
apipac/) to supply the updated drivers and differential files.
For details, read Help on the bundled CD-ROM or visit the
CONTEC's Web site.
< Operating environment >
OS
Windows XP, 2000, Me, 98, etc..
Adaptation language
Visual C/C++, Visual Basic, Delphi, Builder,
etc..
This driver is used to control CONTEC analog I/O boards (cards)
from within Linux.
You can control CONTEC I/O boards easily using the shared library
used by gcc and Kylix, the device driver (module) for each kernel
version, and the board (card) configuration program (config).
CONTEC provides download services (at http://www.contec.com/
apipac/) to supply the updated drivers and differential files.
For details, read Help on the bundled CD-ROM or visit the
CONTEC's Web site.
< Operating environment >
OS
RedHatLinux, TurboLinux, etc..
(For details on supported distributions, refer
to Help available after installation.)
Adaptation language
gcc, Kylix, etc..