Contec ADA16-8/2(LPCI)L, Manual, Page: 2 / 8

2 ADA16-8/2(LPCI)L, AD16-16(LPCI)L, DA16-4(LPCI)L
Ver.1.00
Specifications
Item Specification
Analog input
Isolated specification Un-Isolated
Input type
Single-Ended Input
Number of input
channels
8ch
Input range Bipolar ± 10V
Absolute max. input
voltage ± 20V
Input impedance 1M Ω or more
Resolution 16bit
Non-Linearity error *1*2
±
5LSB
Conversion speed 10μ sec/ch
Buffer memory 1k Word
Conversion start trigger Software / external trigger
Conversion stop trigger Number of sampling times / external trigger/software
External start signal TTL level (Rising or falling edge can be selected by software)
Digital filter (1
μ sec can be selected by software)
External stop signal TTL level (Rising or falling edge can be selected by software)
Digital filter (1
μ sec can be selected by software)
External clock signal TTL level (Rising or falling edge can be selected by software)
Analog output
Isolated specification Un-Isolated
Number of output
channels 2ch
Output range Bipolar
±
10V
Absolute max. input
currency ± 3mA
Output impedance
1 Ω or less
Resolution 16bit
Non-Linearity error *1
± 5LSB
Conversion speed 10μ sec
Buffer memory 1k Word
Conversion start trigger Software / external trigger
Conversion stop trigger Number of sampling times / external trigger/software
External start signal TTL level (Rising or falling edge can be selected by software)
Digital filter (1
μ
sec can be selected by software)
External stop signal TTL level (Rising or falling edge can be selected by software)
Digital filter (1
μ sec can be selected by software)
External clock signal TTL level (Rising or falling edge can be selected by software)
Digital I/O
Number of input
channels 4 TTL levels (positive logic)
Number of output
channels 4 TTL levels (positive logic)
Counter
Number of channels 1ch
Counting system Up count
Max. count FFFFFFFFh (Binary data,32bit)
Number of external
inputs 2 TTL levels (Gate/Up)/ch
Gate (High level), Up (Rising edge)
Number of external
outputs TTL Count match output (positive logic, pulse output)
Response frequency 10MHz (Max.)
Common section
I/O address 64 ports
Interruption level Errors and various factors,
One interrupt request line as INTA
Connector 10250-52A2JL[3M]
Power consumption 5VDC 380mA (Max.)
Operating condition 0 - 50 ° C, 10 - 90%RH (No condensation)
PCI bus specification 32bit, 33MHz, Universal key shapes supported *3
Dimension (mm) 121.69 (L) x 63.41 (H)
Weight 60g
*1: The non-linearity error means an error of approximately 0.1% occurs
over the maximum range at 0 and 50 ambient temperature.
*2: At the time of the source use of a signal which built in the high-speed
operational amplifier.
*3: This board requires power supply at +5V from an expansion slot (it
does not work on a machine with a +3.3V power supply alone).
Item Specification
Analog input
Isolated specification Un-Isolated
Input type Single-Ended Input
Number of input
channels 16ch
Input range Bipolar
±
10V
Absolute max. input
voltage
±
20V
Input impedance 1M Ω or more
Resolution 16bit
Non-Linearity error
*1*2
± 5LSB
Conversion speed 10μ sec/ch
Buffer memory 1k Word
Conversion start trigger Software / external trigger
Conversion stop trigger Number of sampling times / external trigger/software
External start signal TTL level (Rising or falling edge can be selected by software)
Digital filter (1
μ sec can be selected by software)
External stop signal TTL level (Rising or falling edge can be selected by software)
Digital filter (1
μ
sec can be selected by software)
External clock signal TTL level (Rising or falling edge can be selected by software)
Digital I/O
Number of input
channels 4 TTL levels (positive logic)
Number of output
channels 4 TTL levels (positive logic)
Counter
Number of channels 1ch
Counting system Up count
Max. count FFFFFFFFh (Binary data,32bit)
Number of external
inputs 2 TTL levels (Gate/Up)/ch
Gate (High level), Up (Rising edge)
Number of external
outputs TTL Count match output (positive logic, pulse output)
Response frequency 10MHz (Max.)
Common section
I/O address 64 ports
Interruption level Errors and various factors,
One interrupt request line as INTA
Connector 10250-52A2JL[3M]
Power consumption 5VDC 260mA (Max.)
Operating condition 0 - 50 ° C, 10 - 90%RH (No condensation)
PCI bus specification 32bit, 33MHz, Universal key shapes supported *3
Dimension (mm) 121.69 (L) x 63.41 (H)
Weight 60g
*1: The non-linearity error means an error of approximately 0.1%
occurs over the maximum range at 0 and 50 ambient
temperature.
*2: At the time of the source use of a signal which built in the high-
speed operational amplifier.
*3: This board requires power supply at +5V from an expansion slot
(it does not work on a machine with a +3.3V power supply
alone).