Contax U4R, Manual, Page: 133 / 198

Introduction Getting Ready Taking Pictures Playback Set Up
EN-133
NEXT BACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
4
Move the selector lever up
u
to select
[EXECUTE], then press
E
.
Printing begins, and when printing is successfully completed, the print
completion screen appears.
Printing multiple images
1
In the print menu screen, move the
selector lever up
u
or down
d
to select
[PRINT MULTIPLE IMAGES] and then
press
E
.
The print image selection screen appears.
2
Move the selector lever up, down, left or
right
udlr
to select an image you
want to print, then press
E
.
The [
T
] icon appears next to the selected images. Repeat this step to
select the rest of the images you want to print. To deselect a selected
image, select an image marked with the Print icon [
T
] and press E .
A
Important
If an error occurs during printing, an error
message is displayed and printing stops. Refer to
p.190 for information on the message displayed
and the correct response.
B
Note
• You can specify the print settings by clicking the
SCENE button
I
before proceeding with this
step. (See steps 2 to 12 on p.130 for information
on the setting procedure.)
• During printing, a counter on the LCD monitor
displays the total number of prints and the
number of prints completed so far.
• Press the MENU button K to stop printing in
progress.
B
Note
You can select up to 99 images.
EXECUTE
CANCEL
EXECUTE PRINT?
PAPER TYPE
BORDERLESS
DATE
2L
PRINT QTY.
PAPER SIZE 9
PHOTO
YES
NOT PRINT
PRINT MENU
SINGLE PRINT
PRINT MULTIPLE IMAGES
DPOF PRINTING
PRINT SETTINGS
SELECTED TO PRINT: 3
SEL/DESEL
RETURN
OK