Contax I4R, User Manual, Page: 165 / 197

Introduction Getting Ready Taking Pictures Playback Set Up
EN-165
NEXT
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
[POWER SAVE] Having the Camera Turn Off
Automatically to Save Power
Forgetting to turn the camera off can cause the camera's battery charge to
fall to a low level. For this reason, the camera features a power save
function that automatically turns the camera off after several minutes if it is
left turned on. When you activate the power save function, the camera
automatically enters sleep mode after the configured time and then turns
off two minutes later. In sleep mode, the LCD monitor goes blank.
This setting allows you to choose the amount of time before the camera
enters sleep mode.
1
Turn the camera on and press the mode
button until "
G
" lights up on the mode
select LED.
2
Press the 4-way button up or down to
select [POWER SAVE], then press right.
A
Important
Refer to p.32 for information on operating the camera after auto off.
AF MODE
FORMAT
BRIGHT CNTRL
DATE
INSERT DATE SAF
EXECUTE
STANDARD
2004.01.01
NO DATE
POWER SAVE 1MIN.
SET UP(1/3)