Contacta RF-RX1, Installation & User Manual

Page: 6 / 62

2.5 Audio outputs EAR1 and EAR2
The earphones (included) can be plugged into
any of the outputs EAR1 or EAR2.
The 3,5 mm audio jack makes it possible to
connect various audio reproduction equipment,
such as earphones, headphones, neckloops but
also audio amplifiers and more.
A simultaneous use of both outputs is possible
but the volume cannot be adjusted separately.
2.6 Group selection
Switch the device off. Then press and hold both
the »

« and »

« buttons while switching the
device on.
The symbol »GRP« in the display will blink.
Select a group number of your choice between
00 and 39 by pressing the »

« and »

« buttons.
After the selection, wait for 5 seconds to set the
chosen group number.
The »GRP«-symbol will stop to blink and the
selected group number is displayed.
Please note:
Transmitters and receivers must be set to the
same group number if they are to communicate
with each other.
6 English