4
Recommended Tools
Installation Instructions
•
Suitable cable fixings such as gaffer tape or cable clips.
•
3mm flat head screwdriver for adjusting high frequency
compensation.
Installing the Hearing Loop Pad
The hearing loop pad should be installed on the seat used most
frequently by the hearing device user.
Installation:
1. Place the hearing loop pad underneath the seat that the hearing
device user will sit in. Ideally, it should be positioned under the
chair cushion, fixed underneath the chair, or placed on the floor.
2. Route the wire to the hearing loop driver and fix it around the edge
of the room.
Use suitable fixings such as gaffer tape or cable clips to ensure
the wire does not act as a trip hazard.
3. See page 6 for information on how to connect the hearing loop
pad cable to the hearing loop driver.
Hearing loop pad placed underneath
the cushion of the chair.
Hearing loop pad fixed underneath the
chair or placed on the floor.
!
