Constructor CRH1300-18M, Original Instructions Manual

Page: 17 / 38

Page 17 of 38
 Maintain power tools. Check for misalignment
or jammed moving parts, breakages or any other
feature that might affect the operation of the
power tool. If it is damaged, the power tool must
be repaired. Many accidents are caused by using
poorly maintained power tools.
 Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to jam and are easier to control.
 Use the power tool, accessories and cutting
tools, etc., in accordance with these instructions
and in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work which needs to be done.
Using a power tool in ways for which it was not
intended can lead to potentially hazardous
situations.
Service
 Your power tool should be serviced by a
qualified specialist using only standard spare
parts. This will ensure that it meets the required
safety standards.
as well as the additional safety instructions.
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger
of suffocation!
Symbols :
Warning / Danger!
Read manual before use.
In accordance with
essential applicable safety
standards of European
directives
Double insulated
Wear gloves Protection.
HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can
cause hearing loss.
Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord.
Cutting
accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance. Contact
with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to
explosion.
Penetrating a water line causes property damage
or may cause an electric shock.
When working with the machine, always
hold it firmly with both hands and provide for
a secure stance. The power tool is guided more
secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict
adherence to hammer safety rules. If you use
this tool unsafely or incorrectly, you can
suffer serious personal injury.
1. Wear ear protectors.
Exposure to noise can
cause hearing loss.
2. Use auxiliary handles supplied with the
tool.
Loss of control can cause personal injury.
3. Hold tools by insulated gripping surfaces
when performing an operation where the
cutting tool may contact hidden wiring or its
own cord. Contact with a “live” wire will make
exposed metal parts of the tool “live” and shock
the operator.
4. Wear a hard hat (safety helmet), safety
glasses and/or face shield. Ordinary eye or
sun glasses are NOT safety glasses. It is also
highly recommended that you wear a dust
mask and thickly padded gloves.
5. Be sure the bit is secured in place before
operation.
6. Under normal operation, the tool is
designed to produce vibration. The screws
can come loose easily, causing a breakdown