tool. If it is damaged, the power tool must be
repaired. Many accidents are caused by using
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools,
etc., in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work which needs to be done. Using a power
tool in ways for which it was not intended can lead
to potentially hazardous situations.
Service
Your power tool should be serviced by a qualified
specialist using only standard spare parts. This will
ensure that it meets the required safety standards.
as well as the additional safety instructions.
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger of
suffocation!
In this manual and/or on the machine the following
symbols are used:
Warning / Danger!
Read manual before use.
Wear ear protection.
Wear eye protection.
Always wear a dust mask.
In accordance with essential
applicable safety standards
of European directives
Double insulated
ADDITIONAL SAFETY INSTRUCTIONS
FOR ROUTERS
Hold power tool by insulated gripping surfaces, be
cause the cutter may contact its own cord. Cutting a
“live” wire may make exposed metal parts of the
power tool “live” and shock the operator.
Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by your hand or against the body
leaves it unstable and may lead to loss of control.
The allowable speed of the router bit must be at
least as high as the maximum speed listed on the
power tool.
Accessories that rotate faster than permitted can be
destroyed.
Router bits or other accessories must fit exactly in
the tool holder (collet) of your machine. Routing bits
that do not fit precisely in the tool holder of the
machine rotate irregularly, vibrate heavily and can
lead to loss of control.
Apply the machine to the workpiece only when
switched on. Otherwise there is danger of kickback
when the cutting tool jams in the workpiece.
Keep your hands away from the routing area and
the router bit. Hold the auxiliary handle or the motor
housing with your second hand. When both hands
hold the machine, they cannot be injured by the
router bit.
Never cut over metal objects, nails or screws. The
router bit can become damaged and lead to
increased vibrations.
Use appropriate detectors to determine if utility
lines are hidden in the work area or call the local
utility company for assistance. Contact with electric
lines can lead to fire and electric shock. Damaging a
gas line can lead to explosion. Penetrating a water
line causes property damage.
Do not use blunt or damaged router bits. Blunt or
damaged router bits cause increased friction, can
become jammed and lead to imbalance.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance. The power tool is guided more secure with
both hands.
Always wait until the machine has come to a
complete stop before placing it down. The tool insert
can jam and lead to loss of control over the power
tool.
ELECTRICAL SAFETY
Always check that the power
supply corresponds to the
voltage on the rating plate.
DESCRIPTION
Your router has been specially designed for
routing wood, wood products and plastics.
1 On/off switch
2 Lock-off button
3 Collet
4 Router base
5 Locking bolts for parallel guide
6 Clamping lever
7 Speed adjustment wheel
8 Depth stop
9 Revolver-depth stop
10 Locking bolt for depth stop
11 Depth stop adjustment wheel
12 Fine adjustment knob
13 Carbon brush holder