5
Connecting the Link cable
The Link cable is a DVI-type digital cable that connects the Cygnus main chassis to the power supply section.
It carries digital audio and control signals from the power supply’s WiFi transceiver and USB interface to the
main chassis. Before you connect the Link cable, make sure the AC cord to the power supply is not plugged
in, and that the power switch on the power supply is in the off (O) position.
Connect the Link cable by gently pushing the plug onto the connector on the Cygnus main chassis Make sure
the plug is oriented correctly with the connector. Then tighten the two mounting screws on the plug. Repeat
with the other plug and the connector on the power supply.
Connecting the WiFi antenna
The included antenna transmits and receives WiFi network signals. To install it, carefully thread it onto the
antenna connector on the back of the power supply. Point the antenna upward or to the side.
You can now plug the AC power cord into the power supply and into the wall socket, and turn the power
supply’s master power switch on.
Summary of Contents for Cygnus
Page 1: ......
