13
Control screens
Many Cygnus functions are controlled through the LCD
touchscreen. Here is how the control screens function.
Standby screen
Touch the power button to turn the power on. If the power
is off, touching the darkened screen will call up the
Standby screen, as long as the master power switch on the
back of the power supply is in the on position.
Powering On screen
This screen appears immediately after you push the
onscreen power button. It shows that the Cygnus is
warming up. In this mode, none of the controls will
function and the unit will emit no sound.
Input selector (or home) screen
This screen appears when the power is on and the unit is
warmed up. Touching any input button onscreen will
switch to that input. The Screen Setup screen can be
accessed from this screen using the multifunction button
below the display.
Digital input status screen
When you select an input other than the Media Player, this
screen will appear. Pushing the multifunction button under
the Setup label enters the input setep screen.
Digital input setup screen
This screen appears when you push the Setup button when
a digital input is selected. It allows you to select which of
the four digital filters will be used for that input, and to
turn upsampling on and off for that input.
Summary of Contents for Cygnus
Page 1: ......
