44
Technical data
Amplifier
Operating voltage:
12 VDC
Max. current consumption
40 A
Auto flat fuse
2 x 20 A
Input sensitivity
0.1–1 V
Input impedance
47 kOhm
Output rating
4 x 120 W RMS
4 x 300 W max.
Output impedance
2-16 Ohm (stereo operation)
4-16 Ohm (mono operation)
Frequency range
5–50.000 Hz
Harmonic distortion factor
0,06 %
S/N ratio
80 dB(A)
Frequency levels
Low-pass: 50–250 Hz infinitely adjustable
High-pass: 60–1.200 Hz infinitely adjustable
Deep bass amplification
0 / 6 / 12 dB (switchable)
Dimensions (W x H x D):
250 x 59 x 345 mm
Subwoofer
Operating voltage lighting
12 V=
Impedance
4 Ohm
Frequency range:
20-160 Hz
Power rating (RMS/max.)
350 / 700 W
Satellite speakers
Impedance
4 Ohm
Frequency range:
45-20.000 Hz
Power rating (RMS/max.)
150 / 300 W
25
Introduction
Dear customer,
Thank you for purchasing the Raveland Power Package XAB 1200.
With this auto stereo package you acquired a product built according to today’s
state-of-the-art.
The amplifier has an E certification for operation in vehicles and thereby fulfils
the requirements of the valid European and national guidelines. The corre-
sponding declarations and documents are available from the manufacturer.
In order to maintain this condition and ensure safe operation, you as the user must
observe these operating instructions.
In case of questions, consult our technical information service
Germany: Tel. 0180/5 31 21 18 or 09604/40 88 46
Fax 09604/40 88 48
e-mail: [email protected]
Mon - Fri 8.00 to 18.00
Austria: Tel. 0 72 42/20 30 60 · Fax 0 72 42/20 30 66
e-mail: [email protected]
Mon - Thu 8.00 to 17.00
Fri. 8.00 to 14.00
Switzerland: Tel. 0848/80 12 88 · Fax 0848/80 12 89
e-mail: [email protected]
Mon - Fri 8.00 to 12.00, 13.00 to 17.00
Proper use
The proper use of the Raveland Power Package XAB 1200 includes the amplification
of low level audio signals and playback of such signals in vehicles.
The amplifier and the subwoofer lighting is only certified for connection to a 12V
direct current vehicle power supply with a battery having a negative pole on the car-
body and may only be used in cars or trucks having such a power supply built-in.
The speakers may only be connected to speaker outputs of audio devices.
Do not connect any of the devices to the 230V power supply net.
The user must have the type of construction to ensure that the devices will be pro-
tected from dampness and moisture.