Conrad W-210, Operating Instructions Manual

Page: 66 / 156

66
14. Mode “ALARM” (alarm/wake-up mode)
a) Select function
• If the pulse watch is not in mode “ALARM”, push the button (B)
“MODE” briefly repeatedly until the display shows “ALARM”.
• After approx. 2 seconds, the currently set alarm time is shown
automatically.
b) Set alarm/wake-up time
• This shows the order of the setting menu for the alarm time.
• To set the alarm time, keep the button (A) “ADJ/EL” pushed for approx. 2 to 3 seconds. While
the button is pushed, the display shows “ADJUST HOLD”. Once the hours flash and the top of
the display shows “HOUR”, release the button again.