Conrad FHT80B-3, Operating Instructions Manual

Page: 44 / 56

44
g) Test mode (‘
tESt tESt
tESt tESt tESt
’)
You can use this function to check whether all the valve operating mechanisms receive the
radio signal correctly. The addressed valve operating mechanisms acknowledge correct
reception with an acoustic signal. Use the scroller to select the valve operating mechanisms
to be tested.
If the large display shows a ‘0’, then all the receivers are tested, otherwise, only the valve
operating mechanism assigned to the displayed number is tested. The timer in the left corner
of the display counts down to the time at which the next test cycle is to be started.
• Press the ‘ PROG ’ button until ‘
Sond Sond
Sond Sond
Sond
’ appears in the LCD.
• Use the scroller to select the special ‘
tESt tESt
tESt tESt
tESt
’ function.
• To confirm your selection, briefly press the ‘ PROG ’ button.
• Use the scroller to select the valve operating mechanism/s to be tested.
• Press the ‘ PROG ’ button to quit the test function.
h) Displaying the valve position (‘
StEL StEL
StEL StEL StEL
’)
When you select this menu item the heating control’s LCD indicates how far the valve is opened
as a percentage (only for valve operating mechanism 1).
• Press the ‘ PROG ’ button until ‘
Sond Sond Sond Sond Sond
’ appears in the LCD.
• Use the scroller to select the special ‘
StEL StEL
StEL StEL StEL
’ function.
• To confirm your selection, briefly press the ‘ PROG ’ button.
• The display shows the valve opening as a percentage (only possible for valve operating
mechanism 1).
• Press the ‘ PROG ’ button to quit this function.