42
e) Setting the number of valve operating mechanisms (‘
An A
An A
An A
An A
An A
’)
You use this menu item to set the number of radiators (valve operating mechanisms) to be
controlled when the heating control is used to control several valve operating mechanisms in
one large room, for example.
If you install an additional valve operating mechanism, you must ensure that this
valve operating mechanism is assigned the same security code as the valve
operating mechanisms, which are already installed.
• Press the ‘
PROG
’ button until ‘
Sond
Sond
Sond
Sond
Sond
’ appears in the LCD.
• Use the scroller to select the special ‘
An A
An A
An A
An A
An A
’ function.
• To confirm your selection, briefly press the ‘
PROG
’ button.
• The following information is displayed:
0
6
12
18
24
MO DI
MI
DO FR SA SO
Figure 34
• Use the scroller to set the number of radiators (1 to 8) and confirm your setting by briefly
pressing the ‘
PROG
’ button.
The (first) valve operating mechanism is now synchronised to the new security
code. ‘
COdE SynC 001
COdE SynC 001
COdE SynC 001
COdE SynC 001
COdE SynC 001
’ appears on the heating control’s LCD.
Repeat the following 6 steps (see next page) for each installed valve operating mechanism:
1. Remove the battery compartment cover of the (first) valve operating mechanism by
sliding it down and out.
2. Press the button on the valve operating mechanism for approx. 3 seconds until you hear
3 signal tones. The valve operating mechanism is now ready to receive and ‘
AC
AC
AC
AC
AC
’ is
displayed.
3. Press the ‘
PROG’
button on the heating control to start transmitting the heating control’s
security code to the valve operating mechanism.
