22
23
Clock mode
8.
Setting date and time
Time and date can only be set in Barometer mode. You can exit the setting by
pressing the Mode key (17).
When setting the time, you will also be able to set the units for temperature,
pressure and altitude.
In Clock mode, select the time using the Mode key (17) and the Barometer mode using the
1.
Down key (16).
Press and hold the Set key (18) until the date setting appears and a digit starts flashing. Using
2.
the Up/Down keys (15, 16), set the year. By pressing the Set key (18) once more you can
switch to the month setting, followed by the day setting.
Press the Set key (18) and the icons for month and day will start flashing. Using the Up/Down
3.
keys (15, 16), you can select the sequence of how days and months are displayed.
Press the Set key (18) to enter the time setting. The time will be shown, with the seconds digits
4.
flashing. By pressing the Up/Down keys (15, 16) you can reset the display to zero.
Press the Set key (18). Now you enter the minutes setting, followed by the hour setting.
5.
Press the Set key (18) and, using the Up/Down keys (15, 16), set the time system either to
6.
24-h or 12-h display.
Press the Set key (18). The indicator for the temperature unit will start flashing on the display.
7.
Using the Up/Down keys, you can now set the unit to ° C or ° F.
Press the Set key (18). The indicator for the pressure unit will start flashing on the display.
8.
Using the Up/Down keys, you can now set the unit to hPa or inHg.
If you want to modify settings, press the Set key (18) several times until you reach the required
9.
digit; you can then modify the settings by using the Up/Down keys (15, 16).
After correctly setting the date, time and units, exit the settings and save them using the
10.
Mode key (17).
Stopwatch
The stopwatch can be set both in Altimeter mode and in Barometer mode.
The stopwatch can count up or down.
Up-counter:
Press the Mode key (17) until you have reached the stopwatch function.
1.
To start up-counting, press the Up key (15). The flashing icon
2.
indicates that the stopwatch
is running. Pause and then restart the up-counting by pressing the Up key (15).
To reset the stopwatch to zero, press and hold the Down key (16).
3.
Multiple functions are allocated to the keys; depending on the setting you are
modifying, their functions vary.
To press a key, press it briefly once. With certain settings it will be necessary to hold
the key after pressing it down. It will then take approx. 2 seconds until the required
function is actioned.
You can accelerate the counting through numbers by pressing and holding the Up
and Down keys (15, 16) when setting values.
Main functions
7.
Clock mode
The clock, date, stopwatch and alarm functions are available both in Altimeter and Barometer
mode. Clock and date can only be modified in Barometer mode, however.
By pressing the Mode key (17) you can toggle between clock, date, stopwatch and alarm
functions.
If you want to switch between Altimeter and Barometer mode using the Up/Down keys, or want to
use a function from one of these two modes, first ensure that in Clock mode the time is shown.
You can switch to time or date using the Mode key (17).
If you want to switch between Altimeter and Barometer mode using the Up/Down
keys, or want to use a function from one of these two modes, first ensure that in
Clock mode the time is shown.
You can switch to time using the Mode key (17).
Altimeter and Barometer Mode
The Barometer mode shows the air pressure, temperature and weather forecast.
The Altimeter mode shows the altitude and temperature. In this mode, the functions of altimetry
with a reference and recording and playback of altitude readings are available.
By pressing the Up/Down keys (15, 16) you can switch between Barometer and Altimeter mode.
The Altimeter mode can be activated by pressing the Up key (15), the Barometer mode by
pressing the Down key (16). Before switching, ensure that in Clock mode the time is shown.
Summary of Contents for 86 04 27
Page 2: ...3 15 16 19 17 18 20 ...
