55
c) Switching outdoor sensors
If more than one outdoor sensor is registered, you can switch between outdoor sensors by
briefly pressing the "CHANNEL" (10) button.
In addition, it is possible that the data from all of the available outdoor sensors can be displayed
one after another (switching between sensors is carried out automatically every few seconds).
Press the "CHANNEL" (10) button several times until the symbol "
" appears in the display
between the outdoor humidity and outdoor temperature display.
d) Deleting outdoor sensor channel
If when switching between outdoor sensors (see chapter 12. c) an undesired channel is
displayed (e.g. if you have set other channels to the outdoor sensor during initial operation)
this channel can be deleted.
Example:
Channel 2's humidity and temperature are shown as dashes/lines ("- - . -") when switching with
the "CHANNEL" (10) button although the outdoor sensor/channel is no longer used.
Switch to the undesired channel by briefly pressing the "CHANNEL button (10). Press and hold
the "CHANNEL" button (10) for 3 seconds. The channel has now been deleted.
e) Displaying MAX/MIN values
• Indoor humidity/temperature
By briefly pressing the "IN MAX/MIN" button (12), you can switch between displaying the
maximum and minimum values as well as the present values.
• Outdoor humidity/temperature
If more than one outdoor sensor is operated, you should first switch to the desired outdoor
sensor with the "CHANNEL" (10) button.
By briefly pressing the "OUT MAX/MIN" button (13), you can now switch between displaying
the maximum and minimum values as well as the present values.
t
t
t
Summary of Contents for 64 64 44
Page 136: ...136...
