Conrad 56 15 99, Operating Instructions Manual, Page: 42 / 130

41
7. Display and operating elements
☞
The illustrations are located on the front fold-out page.
The following numbers refer to their image markings
1) Fan
2) “MENU/POWER“ button
By pressing this button briefly the system
menu is called up. If the button is pressed for
three seconds, then the monitor is turned off.
(Recording, etc. continue. Only unplugging the
machine turns it completely off).
3) “UP“ button
4) “DOWN“ button
5) Button “+”
6) Button “-”
7) “CH1“ key
8) “CH2“ key
9) “CH3“ key
10)“CH4“ key
11) “QUAD” key
12)“HDD” status LED
The status LED HDD blinks as soon as there is
a data exchange with the hard disk or a record-
ing takes place.
13)“PWR” status LED
This LED lights up green as long as the oper-
ating voltage is applied properly.
14)“MENU/ESC“ button
15)“UP“ button
16)Button „SEL/EDIT“
17)Loudspeaker
18)Button “REW”
19)Button „PAUSE“
20)Button “PLAY”
21)Button “FWD”
22)“STOP” button
23)“REC” button
24)IR receiver
25)“DOWN“ button
26)Button „PTZ“
Serves to control a PTZ camera (not part of the
delivery).
27)Cover hard disk slot
28)Connections „CH1“ (BNC)
29)Connections „CH4“ (BNC)
30)Connection terminal
„RS485/SENSOR/ALARM“
31)Connections „CH3“ (BNC)
32)Connections „CH2“ (BNC)
33)Connections for the power supply „DC 12V“
34)Connection „VIDEO OUTPUT“ (BNC)
35)Connection „AUDIO INPUT“ (Cinch)
36)Buttons „CH1, CH2, CH3, CH4)
37)Button “PLAY”
38)Button “REW”
39)“REC” button
40)Button „PAUSE“
41)“MENU“ button
42)Button „SEL/EDIT“
43)“QUAD” key
44)Button “FWD”
45)“STOP” button
46)Button „PTZ“
Serves to control a PTZ camera (not part of the
delivery).
47)“UP“ button
48)“DOWN“ button