![background image](http://html1.mh-extra.com/html/conrad/51-00-61/51-00-61_operating-instructions-manual_2654319018.webp)
20
= Note! Read the operating instructions!
= Fuse disconnector, short-circuit proof to a limited extent
= Only for use in dry interior environments
= This equipment has been CE tested and complies with the EMC
directive 89/336/EEC and the low voltage directive 73/23/EEC.
• Electric appliances and accessories should be kept out of the reach of children!
• On commercial premises, the accident prevention regulations for electrical facili-
ties and equipment of the relevant professional association must be complied
with.
• In schools and training centres as well as at hobby and DIY workshops, the use of
power packs must be supervised by adequately trained personnel in a responsible
manner.
• Please make sure by all means that your hands, your shoes, your clothing, the floor
and the power pack are dry.
• Live components may be exposed when covers are opened or components are
removed, except if this can be done by hand.
• Before opening it, disconnect the device from all voltage sources.
• Capacitors in the device may still be charged, even if the device has been dis-
connected from all voltage sources.
• Do not switch the switched-mode mains power supply on immediately after it has
been taken from a cold to a warm environment. Under adverse conditions, the
resulting condensation could destroy the device. Allow the device to reach room
temperature before switching it on.
• The switched-mode mains power supply generates heat during operation. Make
sure it is adequately ventilated. Do not cover the ventilation apertures of the device!
29
Technical Data
SPS 1525 PFC
SPS 1540 PFC
SPS 1560 PFC
Operating
230 V~ / 50 Hz
voltage
Power
max. 460 VA
max. 782 VA
max. 1058 VA
consumption
Output3-15 V DC (variable) or fixed voltage of 13.8 V
1 -15 VDC
voltage
controllable
Output
25 A
40 A
5 A front
current
60 A rear
Residual ripple
10 mVrms (rms=effective)
max. 40 mVp-p
Control response
at Change of
mains supply
+/- 10%:
80 mV
0.05%+ 3mV
Change of load
0~100%:
230 mV
0.1% + 5mV
Mains fuse
3.15 A / 250 V
5 A /250 V
(fast blowing)
(fast blowing)
Dimensions
220 x 110 x 240
220 x 110 x 310
220 x 110 x 360
(W x H x D)
(mm)
(mm)
(mm)
Weight
approx. 2.6 kg
approx. 3.5 kg
approx. 5.8 kg
Operating
+ 0 °C to + 40 °C
temperature
Rel. humidity
max. 85 (non-condensing)