background image

Intended use

The Christmas tree candles are used for the idyllic lighting of a Christmas tree. The Christmas tree lights can 
be switched on or off wirelessly using the IR remote control enclosed. 
The product is supplied with power via batteries (included in the package).
The product must not get damp or wet; it is intended only for use in dry, enclosed indoor locations.
Use of this product in any other way than as described above is not permitted. All the safety and assembly 
instructions must be carefully followed! 
This product complies with the applicable national and European requirements. All names of companies and 
products are the trademarks of the respective owners. All rights reserved.

Contents

•  10x Christmas tree candles
•  10x batteries of type AAA/micro
•  IR remote control
•  Battery CR2032 for IR remote control
• Operating instructions

Safety Instructions

   The warranty will be void in the event of damage caused by failure to observe these safety 

instructions. We do not assume any liability for any resulting damage!

 

 We shall not accept liability for damage to property or personal injury caused by incor-
rect handling or non-compliance with the safety instructions. The warranty will be void in 
such cases!

 

•   The unauthorised conversion and/or modi

fi

 cation of the product is not permitted for safety and 

approval reasons (CE). 

 

•   The product is not a toy and does not belong in the hands of children. Use the product out of 

the reach of children. It contains small items and batteries.

 

•   The product must not get damp or wet; it is intended only for use in dry, enclosed indoor loca-

tions.

 

  Protect the product from cold, heat, dust and dirt.

 

•   Do not leave packaging material carelessly lying around, since it could become a dangerous 

plaything for children.

 

•   Handle the product with care; it can be damaged by impacts, blows, or accidental falls, even 

from a low height.

Notes on (rechargeable) batteries

•  Batteries/rechargeable batteries must be kept out of the reach of children.
•   Check that the polarity is correct when inserting the batteries/rechargeable batteries (pay attention to 

plus/+ and minus/-).

•   Do not leave batteries/rechargeable batteries lying around; there is a risk that they could be swallowed by 

children or pets. If they are swallowed, consult a doctor immediately.

•   Leaking or damaged batteries/rechargeable batteries in contact with the skin can cause acid burns; there-

fore, use suitable safety gloves. 

   Liquids leaking from batteries/rechargeable batteries are very chemically aggressive. Objects or surfaces 

coming into contact with these liquids might be considerably damaged. Thus, store batteries/rechargeable 
batteries in a suitable location.

•   Batteries/rechargeable batteries must not be short-circuited, opened or thrown into 

fi

 re. There is a risk of 

explosion!

•   Conventional batteries must not be recharged. Risk of explosion! Charge only rechargeable batteries that 

are intended for this purpose; use a suitable battery charger.

   When using rechargeable batteries in the Christmas tree candles, expect a considerably shorter 

running time and a lower brightness due to the lower operating voltage (normal battery = 1.5 V/
cell, rechargeable battery = 1.2 V/cell).

 

Therefore, we recommend that you use conventional alkaline batteries. 

Inserting/replacing the Batteries

a) Christmas tree candles

•   Unscrew the upper part of the Christmas tree candles (hold the green bottom part and turn the upper part 

to the left counter-clockwise).

•   Then insert a type AAA/micro battery, observing the correct polarity. 

The positive pole of the battery should point towards the candle top.

•   Reassemble the Christmas tree candle (hold green bottom part and turn the upper part to the right clock-

wise). Do not exert any force.

  The LED in the Christmas tree candle should light up after the candle parts are screwed together.  
•   A battery change is necessary when the LEDs in the Christmas tree candle shine weakly or do not shine 

at all.

b) IR remote control

•   Normally, the battery for the IR remote control is not en-

closed in the package separately but is already inserted 
in the remote control.

•   Open the battery compartment on the bottom side of 

the IR remote control. 

•   Check whether there is a protective strip between the 

battery and the battery contacts and remove it.

  The protective strip prevents the battery from discharging too early.
•   The battery needs replacing if the range of the IR remote control decreases or the Christmas tree candles 

no longer respond to the remote control.

   When replacing the battery, pay attention to the correct polarity. The positive pole (+) of the battery must 

face outwards, towards you.

•  Close the battery compartment again.

Operation

•   Fasten the Christmas tree candles on a branch of the Christmas tree that is strong enough. The Christmas 

tree candles can be adjusted vertically using the joint on the clip. 

•   To switch the Christmas tree candles on or off, point the front side of the IR remote control (with the inte-

grated IR LED) at the Christmas tree candles and press the corresponding button:

  I = On
  O = Off

   If not all of the Christmas tree candles light up or go out, keep the corresponding button pressed 

longer (or press the corresponding button several times). Hold the front side of the IR remote 
control closer to the Christmas tree candles; point the IR LED directly at the Christmas tree 
candles (the light of the IR LED is not visible to the human eye). 

 

 In order for the Christmas tree candles to respond to the IR remote control correctly, a direct 
visual connection is required.  Branches/twigs between the IR remote control and the Christmas 
tree candles may prevent a correct response.

•   Due to the IR receiver, the Christmas tree candles require a certain amount of power, even when they are 

switched off.  If you do not intend to use the Christmas tree candles for a long period (e.g. if they are to be 
stored away), remove the batteries. 

Disposal

a) Product

   Electronic devices are recyclable waste materials and must not be disposed of in the household 

waste!

 

 Dispose of an unserviceable product in accordance with the relevant statutory regulations.

b) Normal and Rechargeable Batteries

As the end user, you are required by law (Battery Regulation) to return used batteries and rechargeable 
batteries. Do not dispose of used batteries in the household waste!

   Batteries/rechargeable batteries that contain hazardous materials are labelled with the following 

symbols to indicate that disposal in the domestic waste is forbidden. The symbols of the relevant 
heavy metals are: Cd=Cadmium, Hg=Mercury, Pb=Lead (marked on batteries/rechargeable 
batteries, e.g. under the rubbish bin symbol shown to the left).

You can return your used batteries/rechargeable batteries free of charge at the of

fi

 cial collection points of 

your community, in our stores, or at places where batteries or rechargeable batteries are sold!
You thereby ful

fi

 l your statutory obligations and contribute to the protection of the environment.

Technical Data

a) Christmas tree candles

Power supply ........................... 1x battery of type AAA/micro per Christmas tree candle 
Light bulb ................................. 1x LED, not replaceable
Dimensions .............................. Ø 15 mm, length 90 mm (incl. attachment clip)
Weight ..................................... approx. 20 g (incl. battery)

b) IR remote control

Power supply ........................... 1 battery of type CR2032

 

   O P E R A T I N G   I N S T R U C T I O N S   www.conrad.com

10 wireless mini Christmas 
tree candles

 Item no. 43 95 68

 Version  05/13

  

   These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,  

D-92240 Hirschau (www.conrad.com). 

 

 All rights including translation reserved. Reproduction by any method, e.g. photocopy, micro

fi

 lming, 

or the capture in electronic data processing systems require the prior written approval by the editor. 
Reprinting, also in part, is prohibited. 

 

 These operating instructions represent the technical status at the time of printing. Changes in         
technology and equipment reserved. 

 

© Copyright 2013 by Conrad Electronic SE.

Summary of Contents for 43 95 68

Page 1: ...kerze sollte nach dem Zusammenschrauben aufleuchten Ein Batteriewechsel ist erforderlich wenn die LED in der Christbaumkerze nur noch schwach oder über haupt nicht mehr leuchtet b IR Fernbedienung Die Batterie für die IR Fernbedienung liegt normaler weise nicht getrennt bei sondern ist bereits eingelegt Öffnen Sie das Batteriefach auf der Unterseite der IR Fernbedienung Kontrollieren Sie ob evtl e...

Page 2: ...when the LEDs in the Christmas tree candle shine weakly or do not shine at all b IR remote control Normally the battery for the IR remote control is not en closed in the package separately but is already inserted in the remote control Open the battery compartment on the bottom side of the IR remote control Check whether there is a protective strip between the battery and the battery contacts and r...

Page 3: ...ite dans le sens horaire Ne forcez pas Les LED dans les bougies de Noël doivent s allumer après le remontage Le remplacement des piles est nécessaire quand les LED dans les bougies de Noël éclairent faiblement ou plus du tout b Télécommande à infrarouge La pile pour la télécommande IR est normalement déjà installée dans la télécommande Ouvrez le compartiment à piles située à l arrière de la téléco...

Page 4: ...ar is gezet Vervang een batterij wanneer de LED in de kerstboomkaars nog slechts zwak resp helemaal niet meer brandt b IR afstandsbediening De batterij voor de IR afstandsbediening zit er normaal gesproken reeds in en ligt er niet afzonderlijk bij Open het batterijvak aan de onderkant van de IR afstandsbediening Controleer of er een veiligheidsstrip zit tussen de batterij en de batterijcontacten e...

Reviews: