Conrad 372884, Operation Instructions Manual, Page: 76 / 168

72
Restoring factory settings for workout goals
Select ‘Menu:’ → ‘HRM’ → ‘HR Zone’ → ‘Reset ALL’ to restore the factory settings of workout goals.
The pulse can be monitored with the pulse watch and pulse rate monitor. However,
the product is not a substitute for professional medical devices or monitoring by a
doctor.
f) Displaying the workout history
The product saves your workout data. In all you can save four workouts. To display the workout data,
proceed as follows:
• The pulse watch must display the main display of one of the four modes (Compass, Time, Workout,
Navigation mode). It must not display a sub-menu for settings.
• Hold down the ‘MODE’ (2) key for 3 seconds until ‘Menu:’ is displayed.
☞
With the ‘ST. / STP’ (3) and ‘LAP / RESET’ (5) keys select the individual menu items,
with the ‘VIEW’ (4) key you can go to the respective sub-menus or change the status
of the respective setting. With the ‘MODE’ (3) key, return to the previous menu.
• Select ‘Menu:’ → ‘Workout’ → ‘History’.
• Press the ‘ST. / STP’ (3) and ‘LAP / RESET’ (5) keys to select a workout history.
• Press the ‘VIEW’ (4) key to switch between ‘Record’ and ‘Lap’ views.