![background image](http://html.mh-extra.com/html/conrad/28/28_operating-installations_2654651044.webp)
44
Call the setting menu
While the slide show is running, use the button “SETUP” to activate the setting menu. This is described in chapter
11. d)
Push the button “SETUP” (or the button “EXIT”) again to make the setting menu disappear again.
Continue the slide show by briefly pushing the button “ENTER”.
Rotate pictures or zoom function
While the slide show is running, use the button “MENU” to call the following menu.
Select the functions as usual with the arrows “
W
” and “
X
”. Push the button “MENU” (or the button “EXIT”) again to
make the menu disappear again.
A = Enlarge picture (possible several times in sequence); move the selected section of the picture with the arrow
buttons
B = Reduce picture size (possible several times in sequence); move the selected section of the picture with the arrow
buttons
C = Rotate picture to the right by 90° (possible several times in sequence)
D = Rotate picture to the left by 90° (possible several times in sequence)
E = Delete picture: Push the “ENTER” button to show a safety prompt. Use the button “ENTER” to delete the picture;
use “EXIT” to return to the previous menu.
Attention!
Deleted pictures cannot be recovered.
F = Call the setting menu: For this, observe the description in chapter 11. d).
G = Display the EXIF files (if they are contained in the picture file)
f) Switching between Memory Card and USB Flash Drive
After calling the main menu and choosing the corresponding function (see chapter 11. a), use the arrows “
W
” and
“
X
” to switch between the memory card and the USB flash drive.
Of course, this is only possible if you have plugged in a memory card and a USB flash drive into the weather
station at the same time.
Confirm your selection with the button “ENTER” on the IR remote control (or briefly push the 5-directional button on
the rear of the weather station)
E
B
C
D
F
A
G