4
Important:
To prevent the tip surface from breaking down, do not keep the soldering iron switched
on for extended periods.
After use
1. Tin the soldering tip.
2. Move the switch into the position
0
.
3. Disconnect the mains plug from the mains socket.
7 Cleaning and maintenance
7.1 Cleaning
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Let the product cool down to ambient temperature.
3. Clean the product with a dry, fibre-free cloth.
7.2 Maintaining soldering tips
■
Always keep the tip tinned before switching off or storing for any period of time.
■
Never clean the tip with coarse, abrasive materials like files.
If oxide forms on the tip, lightly rub with abrasive paper, wipe clean, then immediately reheat
and re-tin the tip to prevent oxidation of the wettable surface.
8 Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed of
as unsorted municipal waste at the end of its service life.
Owners of WEEE shall dispose of it separately from unsorted municipal waste.
Spent batteries and accumulators, which are not enclosed by the WEEE, as well
as lamps that can be removed from the WEEE in a non-destructive manner, must
be removed by end users from the WEEE in a non-destructive manner before it is
handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-
back of waste. Conrad provides the following return options
free of charge
(more details on
our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points
set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply
in countries outside of Germany.
9 Technical data
9.1 Power supply
Input voltage .................................. 220 - 240 V/AC
Input AC frequency ........................ 50 Hz
Power consumption ....................... 40 W
9.2 Heating
Soldering tip temperature .............. max. 480 °C
9.3 Environment
Operating temperature .................. -6 to +46 °C
Operating humidity ........................ 10 - 70 % RH (non-condensing)
Storage temperature ...................... -20 to +60 °C
Storage humidity ............................ 10 - 70 % RH (non-condensing)
9.4 Others
Dimensions (Ø x L) ........................ 35 x 245 mm
Weight (approx.) ............................ 192 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2497609_V1_0322_jh_mh_en
477927179
I2/O1
en
