The higher the temperature difference between the sensor and the liquid being tested,
the longer stabilisation of the measured value will take. Stabilisation can take between
ten seconds and five minutes.
8. To retain the measured value in the display when the sensor is removed from the liquid,
press the button
(5)
. The Data Hold Symbol "HOLD"
(K)
appears in the LCD display.
9. Press the button again to deactivate the data hold function and the measured value is
deleted. The Data Hold Symbol “HOLD”
(K)
will disappear from the LCD display
(6)
.
The automatic temperature compensation (ATC) always ensures precise measure-
ments even where there are differing liquid temperatures.
1
Displaying maximum/minimum values and switching temperature units
1. The meter can display the maximum and minimum values of a measurement.
2. Press and hold the button until "MAX"
(C)
and "MIN"
(A)
flash simultaneously in the
LCD display.
3. Press the
button briefly to switch between the maximum and minimum values.
4. Press and hold the button
(4)
to exit display of the MIN/MAX values.
5. Press and hold the
button (10)
to toggle the temperature units between °C and °F.
g) Advanced Settings
1. Press the
button (10)
, to select operating mode “DO”.
2. Then press and hold the button
(4)
to call up the selection menu. Press the
but-
ton
(5)
, to select "SaLC" (salinity compensation) or AltC (altitude compensation). Press the
button
(4)
to confirm your selection.
3. Press the button
(5)
or the
button (10)
, to set the degree of the salinity or the alti-
tude compensation. The salinity compensation can be set in a range between 0 and 50 ppt.
The altitude compensation is adjustable between the values of 0 and 20,000 ft.
4.
Confirm the value set by pressing the
button
(4)
.
27
Summary of Contents for 1762761
Page 63: ......
