This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited. This publication represent the technical status at the time of
printing.
© Copyright 2015 by Conrad Electronic SE.
V2_0815_02_JH
g) Troubleshooting
Nothing shown on the bicycle computer display
•
Press any button to switch on the computer.
•
Check the battery in the bicycle computer and replace it with a new one if necessary.
No recognition of wheel rotations, no data transmission by the wireless sensor.
•
The distance between the wireless sensor and the magnet should be approximately 5 mm. You should
hear a soft click when the magnet passes the speed sensor. If necessary, mount the magnet on another
bicycle spoke. Turn the speed sensor inwards slightly to decrease the distance between the speed sensor
and the magnet (see "Installation and mounting")
•
Check the position of the magnet and speed sensor relative to one another. The magnet must pass over
the part marked "SENSOR" in the front section.
•
Check the battery in the speed sensor and replace it with a new one if necessary.
Black display
•
The display was exposed to direct sunlight for too long. The display will work again when the screen
cools down.
Maintenance and cleaning
•
The product does not require maintenance except for occasional cleaning. For cleaning, use a soft, anti-
static and lint-free cloth.
•
Do not use abrasive or chemical cleaning agents.
•
Do not immerse the product in water.
Declaration of Conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this product
conforms to the fundamental requirements and the other relevant regulations of the directive 1999/5/EC.
The Declaration of Conformity for this product can be found at www.conrad.com.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
As the end user, you are required by law (Battery Ordinance) to return all used batteries; disposal of them in
the household waste is prohibited!
Contaminated batteries are labelled with this symbol to indicate that disposal in the domestic
waste is forbidden. The designations for the heavy metals involved are: Cd = Cadmium, Hg =
Mercury, Pb = Lead (name on batteries, e.g. below the trash icon on the left).
Used batteries can be returned to collection points in your municipality, our stores or wherever
(rechargeable) batteries are sold.
You thus fulfil the legal requirements and make your contribution to protecting the environment.
Technical data
a) Bicycle computer
Battery ................................................................... CR2032
Operating conditions .............................................. 0 to +40 °C, 0 - 90 % RH
Storage conditions ................................................. -10 to +50 °C, 0 - 100 % RH
Dimensions (W x H x D) ........................................ 39 x 16 x 49 mm
Weight ................................................................... 22 g (with battery)
b) Speed sensor
Battery ................................................................... CR2032
Transmitting frequency .......................................... 125 kHz
Range .................................................................... max. 70 cm
