9
User Guide - Trench Box
Original Working Instructions
Usage Instructions
Important Assembly Notes
• Top extension boxes are to be assembled in the same way but only two
struts should be fitted. Extension boxes are secured to the base boxes
using connector brackets and pins.
• Keep hands clear of naked surfaces.
Assembly Instructions
1.
Before assembling Conquip base boxes and extension boxes, lay timber
bearers on the ground.
2.
Attach a certified 4 leg chain sling to the lifting points on one of the panels and
lower onto the timber bearers.
3. Insert the rocker assemblies into the panel brackets and secure with
40mm pins and R-clips.
4. Lower the pre-assembled struts onto the rocker assemblies securing the struts
to the panel brackets using pins and R-clips.
5. Connect the 4 remaining rocker assemblies to the struts using pins
and R-clips.
6.
Connect the sling to the lifting points of the panel facing downwards and lift
into position above the struts.
7. Lower the plate carefully, guiding the runners onto the four upright
strut assemblies.
Do not detach the chains until the panel is secured to the strut assemblies.
8. Secure the struts to the panel with the remaining four pins and R-clips.
9.
Connect the lifting sling to the top lifting points on the Trench Box and lift the
box to the upright working position
10. The box is assembled and ready to move into the trench.
Scan for video guide!
Summary of Contents for Trench Box
Page 1: ...User Guide Trench Box...
