3
Nightingale
Baby Alarm Monitor
STANDARD VERSION
So how does it work and how do I use it?
Once connected the Nightingale will vibrate when the baby alarm is activated.
Very simply you replug the power supply lead which normally goes into the baby
alarm receiver into the NIGHTINGALE and plug the lead from the NIGHTINGALE
back into the baby alarm receiver (parent’s end). The transmitter (child’s end) of
the baby alarm is used as per normal.
Optional Alarm clock input:
for use
with a Connevans digital modified clock (not
supplied) – to wake you in the
morning.
Optional flashing xenon
strobe:
for day use
(when connected, the internal
NIGHTINGALE vibrator is
disabled so that it doesn’t vibrate
off the table onto the floor!)
Optional separate
vibrator:
so you can have the NIGHTINGALE on the bedside and easily swop between
strobe and vibrator. Especially
useful if you intend to take the
Nightingale around the house
then you can leave the vibrator
safely tucked up in bed,
(the internal vibrator is disabled
when an external vibrator is
connected).
Nightingale
Baby Alarm Monitor
STANDARD VERSION
2
B0NGALES4
October 2006 V4.0
B0NGALES4
October 2006 V4.0
The NIGHTINGALE
is a cost effective but reliable add-on vibrating accessory
to a conventional baby alarm such as the
TOMY Walkabout Classic.
The TOMY Walkabout Classic Advance, and other similar models, give both an
audible and visual alert of a baby crying, which is usually an adequate indication
during the day but at night is insufficient to wake up somebody who is deaf.
The Connevans Nightingale baby
alarm monitor simply plugs into the
baby alarm and vibrates when the
baby cries.
No modification of the
baby alarm is required.
If you wish to use the
NIGHTINGALE with baby alarms
other than the TOMY Walkabout
Classic please refer to page 7.
