fmGenie Diversity Soundfield
B44FDIVINS – fmGenie Diversity Soundfield Installation Instructions V1.3
11
Do not allow the door to swing open – either use it shut or fully open,
to reduce the probability of someone hitting their head on it.
The unit will become warm during normal use.
The inside front panel will become hot when the system is producing continuous loud
sound.
Open the door if the unit is to be used for extended periods (i.e. more than ten minutes)
with loud or continuous sound such as music or if the ambient temperature is above
30°C.
Do not block the ventilation holes at the bottom and top of the unit.
Do not allow the tip of the charger lead to touch any metallic object, including the
casework of the fmGenie Diversity. Store the charger plug safely in the insulated door
pouch when not in use or remove from the front panel socket.
The charger in the fmGenie Diversity is designed only to charge fmGenie units
containing Ni-MH batteries of 1300mAh capacity. Do not attempt to charge other
devices, battery types or use for other purposes.
Do not attempt to charge units containing non-rechargeable batteries.
Do not expose the fmGenie Diversity to rain or moisture.
The fmGenie Diversity unit MUST be earthed.
For continued protection, replace the fuse only with the same type and rating i.e.
Antisurge T315mA.
Hazardous voltages exist inside the fmGenie Diversity unit.
No user serviceable parts inside.
Refer servicing to authorised representatives of Connevans Limited.
Remove the mains plug from the wall socket before undertaking any servicing
operations.
The fmGenie Diversity is manufactured by:
Connevans Limited
54 Albert Road North, Reigate, Surrey RH2 9YR
Helpline 01737 247571 [email protected]
Cautions:
!
fmGenie Diversity Soundfield
10
B44FDIVINS – fmGenie Diversity Soundfield Installation Instructions V1.3
switched itself off. In this eventuality, the fmGenie transmitter will indicate the total
number of charge hours that have completed. For further information, refer to the
fmGenie instruction manual.
Cutting short the charge cycle
If you wish to cut short the charge cycle, the charging plug may simply be removed
from the fmGenie transmitter.
This will cause two things to happen:
1)
The fmGenie Diversity receiver amplifier will return to normal amplifier 'on' mode
after about 10 seconds (indicated by the red power lights going solid)
2)
The transmitter display will show the approximate hours spent on charge
e.g. "1H". Press and hold the star button to clear the display.
Notes:
a) When topping up battery charge the rough ratio is 1 hour charge should give
5 hours use.
b) Because the transmitter and its batteries have been ‘fooled’ into thinking they are
charged it will be necessary to remove one battery for 15 seconds (to force the 'new
battery' charge mode) before attempting to charge again.
FINAL NOTE:
Probably the most useful bit of advice that we can give to a user is to
get involved with setting up and understanding their equipment from the beginning.
Adjusting tone & volume controls should not be regarded as a 'black magic' art only for
a technician. It is not unknown for our customer services team to receive a phone call
asking for permission to turn the volume up or down!
Understanding how the equipment works is important as it will prove very expensive to
request a technician service visit every time somebody turns a volume to zero or the
cleaner unplugs the mains lead!
