14
Azden IRR-40P ‒ User & Installation Guide B460IRR40P V1.0
Azden IRR-40P Soundfield
Solid ceiling ‒ direct or with mounting box
1
The mounting plate
can be bent to
allow space for the
F-connector and
cable and screwed
directly to the
ceiling.
2
If a mounting box is used, the box is fitted
directly to the ceiling and the sensor is fitted
to the lid as shown.
The cable exit hole is drilled by the installer to
suit the trunking used.
The mounting box (pt no 45IRSDB) is available at
additional cost.
Wall mounted sensors
Wall mounted sensors should be mounted between
2 and 2.5m above the floor, preferably not higher than the
loudspeakers.
The bracket for the wall mounted sensor needs to be bent
70mm from the flat end of the bracket.
Suspended ceiling
The mounting plate can be removed
and used as a template for drilling
holes in the ceiling tiles.
70mm
Mounting the infra red sensors
Dome sensor mounting is dependent on the type of ceiling in the classroom.
