5
www.c2vision-eu.com
1. Connect the CAM-LR6-AD’s male connector to the vehicles original female
specific power connector.
2. Connect the 10-pin molex on the harness to the CAM-LR6-AD interface.
3. Disconnect the original monitors LVDS connector from the head unit and
reconnect this to the port on the interface marked “TO LCD”.
4. Connect the new LVDS harness within the kit between the head unit’s
pre-existing connection and the port on the interface marked “HU IN”.
5. Once all connections are established (including the interface wiring)
connect the male connector to the head unit.
5
3
4
Dipswitches on Interface Rear
INTERFACE LED STATUS & DIPSWITCHES
1
2
Located on the rear left of the interface are 4 dipswitches that deal with the CAN
data. Below is a list of the various functions that they perform:
Vehicle/Navigation
Dip 1
Dip 2
Dip 3
Dip 4
Jaguar XF, Discovery Sport
OFF
ON
OFF
OFF
Jaguar XE
OFF
OFF
OFF
OFF
Jaguar XJ
ON
OFF
OFF
OFF
All other Land Rover vehicles
ON
OFF
OFF
OFF
NOTE: you will need to reset power to the interface after any change to any of the dipswitches.
INSTALLATION
Connecting Interface & Harnesses
