MS|2706|DS|04|19
FLEXI/FLEXI GOLD AND COMPAD
USER MANUAL
20
MAINTENANCE
CHANGE ALKALINE BATTERIES
FLEXI
It is recommended that a full set of batteries are stored nearby (4 off
AA/LR6), which are inserted
when the “beep” is reported (please
note that batteries MUST be correctly inserted so as to not damage
the Flexi Unit.
The Flexi will remember the ENROLLED USERS upon changing the
batteries. You do NOT need to reenrol anyone.
How to change the batteries?
1.
Use a
Phillips head screwdriver
( )
to open the upper hatch
of the Rear Housing (safe side).
2.
Remove all used batteries with care.
Dispose to proper
recycling unit
3.
Insert new batteries
, one by one. Make sure they are correctly
inserted by checking drawings on the battery holders so as to
not damage the Flexi Unit.
4.
When the last battery is connected the green
LEDs
will flash 3
times.
5.
Screw
the hatch on.
ComPad
It is recommended that a full set of batteries are stored nearby (2 off
AA/LR6), which are inserted when the (please note that batteries
MUST be correctly inserted so as to not damage the ComPad Unit).
Take of the batteries hatch from the back side of the ComPad and
replace.
FINGERPRINT SENSOR
Do not abuse the fingerprint sensor by scratching the surface,
contacting the sensor’s surface with heat, pressing hard during
placement of fingerprint for verification. Clean the sensor