manualshive.com logo in svg

Connect Tech GraphiteVPX/GbE, User Manual, Page: 2 / 26

Share
Download
Connect Tech GraphiteVPX/GbE User Manual Download Page 2

 

GraphiteVPX/GbE 16+4-Port - Managed Carrier Ethernet Switch  

Users Guide 

www.connecttech.com

 

 

Document: CTIM-00461 
Revision: 0.02 

 

 

Page 2 of 26 

Connect Tech Inc.  800-426-8979 | 519-836-1291

 

Date: 2016/10/27 

 

 

 

 

 

Table of Contents 

Table of Contents

 ................................................................................................................................... 2

 

Preface

 ................................................................................................................................................... 3

 

Disclaimer ....................................................................................................................................................... 3

 

Customer Support Overview ........................................................................................................................... 3

 

Contact Information ........................................................................................................................................ 3

 

Limited Product Warranty ............................................................................................................................... 4

 

Copyright Notice ............................................................................................................................................. 4

 

Trademark Acknowledgment .......................................................................................................................... 4

 

ESD Warning .................................................................................................................................................. 5

 

Revision History

 .................................................................................................................................... 5

 

Introduction

........................................................................................................................................... 6

 

Product Overview

 .................................................................................................................................. 8

 

Block Diagram ................................................................................................................................................ 8

 

Ordering Part Numbers ................................................................................................................................... 9

 

Connector Locations (VPG201) .................................................................................................................... 10

 

Connector Summary ...................................................................................................................................... 11

 

VPG20x - Detailed Feature Pinouts

 ...................................................................................................... 12

 

CLI Management Interface

 .................................................................................................................. 13

 

CLI Access via the RS232 Serial Port ........................................................................................................... 13

 

CLI Basics ..................................................................................................................................................... 14

 

Complete CLI and Protocol Configuration Reference Guide ........................................................................ 14

 

Web Management Interface

 ................................................................................................................. 15

 

Accessing the Web Management Interface ................................................................................................... 15

 

Web Management Interface Overview .......................................................................................................... 16

 

Complete Web Protocol Configuration Reference Guide ............................................................................. 16

 

Port LED Details

 ................................................................................................................................. 17

 

System Management Interface

 ............................................................................................................. 18

 

Addressing the I2C Slave Interface (I2C Mux) ............................................................................................. 18

 

Writing to the I2C Slave Interface................................................................................................................. 19

 

Reading from the I2C devices ....................................................................................................................... 19

 

Thermal Details

 ................................................................................................................................... 20

 

Thermal Parameters ....................................................................................................................................... 20

 

Mechanical Details

 ............................................................................................................................... 21

 

3D STEP Models ........................................................................................................................................... 21

 

VPG202 Top Side View ................................................................................................................................ 22

 

VPG202 – Bottom Side View ....................................................................................................................... 23

 

RTM Details

 ........................................................................................................................................ 24

 

RTG002 – Pinout Information ...................................................................................................................... 25

 

RTG002 – Top Side View ............................................................................................................................. 26

 

RTG002 – Bottom Side View ....................................................................................................................... 26

 

 

 

Summary of Contents for GraphiteVPX/GbE



























Reviews:

No comments