Connect SmartHome CSH-GRGDROPN, User Manual

Page: 8 / 66

Installation Note:
Please power off your garage door opener before installing the device.
1. Connect controller to your garage door opener using the cable.
Connect the cables of the controller to your garage door opener terminals which
should be connected to the wall button; If you have installed a wall button, please
twist them together.
2. Install Door Sensor
1.) Close your garage door.
2.) Clean the area on your garage door where the sensor is to be installed (top panel
of the garage door).
3.) Remove the double-sided tape and press into place.
Note:
The door sensor will only work if mounted to the top panel of your garage door. Any
other placement will cause incorrect operation.